Lithofin MN Cobble-Wax For Marble Surfaces

  • £24.48 inc vat
  • RRP £27.20 inc vat
Item in Stock   |   Usually dispatched within 24 hours
  • Ready for use
  • Easy to polish
  • For indoor use only
  • Contains solvents
  • CFC-free


A special product from the LITHOFIN-Range for marble and natural stone (MN). It is a ready-to-use wax system in paste form and contains natural and synthetic wax raw materials, which form a hard-wearing film.

Lithofin MN Cobble Wax is a solid paste, which is easy to apply and spread. It forms a surface wax layer, which can be polished when dry, and gives the background a colour saturated, silky shine appearance. The surfaces are also less sensitive, easier to maintain and are made more attractive.

Technical Data:
Density: 0.80 g/m³
pH-Value: n/a
Flashpoint: approx. 39°C (c.C)
Appearance: yellow-beige, solid
Odour: aromatic

Field of Use:
For final treatment of floors in antique tumbled or cobbled marble with sand-blasted, acid or similarly treated surface. To improve resistance to stains the surfaces should also be pre-treated with Lithofin MN Stain-Stop. Treatment results in a strong-colour, antique effect appearance. Lithofin MN Cobble Wax is also used for maintaining already waxed surfaces. It is not suitablefor polished or surfaces treated with a topical sealant, or for external use.

Surface Requirements
The surface must be completely dry, clean, free of stains and absorbent. Cement films can be removed with Lithofin MN Builders' Clean. This treatment will make the surface rougher and open the pores of the stone, allowing the wax to penetrate more effectively. Pre-treatment with Lithofin MN Stain-Stop is recommended, to improve resistance to stains. In this case apply Lithofin MN Cobble Wax immediately after about 1-2 hours drying time. The temperature of the surface must not be below 12oC.

Directions for Use:
We strongly recommend applying a sample surface. This shows what the result will be, and gives information on how much to apply, drying time etc. Lithofin MN Cobble Wax is ready to use and can be worked directly out of the tin. Particularly with more impervious surfaces, it should be warmed up in a water-bath to liquefy it more. The fluid, warm wax will penetrate more deeply and give greater deepening of colour. Apply evenly and thinly, spread and rub in with a fluff-free cloth. You may need to apply treatment twice with strongly absorbent, porous backgrounds. Polish with a brush or polishing pad when dry.

Drying Time:
Approx. 2 hours to polishing, can have things put on it after about 12 hours. Where larger amounts are applied, extend the drying time to about 24 hours.

For first treatment about 20 m²/litre depending on type of surface, about 40 m²/litre when re-waxing.

* Please note that tile orders are subject to minimum order quantities to qualify for free delivery as they require specialist/palletised delivery.


There are two types of products that you can order from Period Property Store, which will affect delivery:

   1. 'Standard' products are products that do not fall into our 'Big & Bulky' category.
   2. 'Big & Bulky' products require palletised or specialist courier delivery.

Our 'Standard Parcel Delivery' & 'Next Day Parcel Delivery' options are not available for products marked 'Big & Bulky'

All orders are subject to product availability. We aim to process all orders within five working days.

Depending on your delivery postcode and which products you order, delivery charges may apply.

All delivery times and dates are estimates. We will try our best to meet the delivery estimates we have given you but shall not be responsible for any failure to deliver ordered products within these stated time frames. We will let you know if we cannot deliver your products within 30 days of when we receive payment from you, and give you the opportunity to either wait for the products or cancel your order.

Our next day delivery service applies to working weekdays only and does not include weekends or bank holidays. This service is available up until 14:00 GMT on the day of placing an order. Orders received after 14:00 GMT with be dispatched on the following working weekday.

We are not able to process orders or deliver on UK bank holidays and Sundays.

We strongly recommend that you do not book fitters or tradesmen until your order has actually been delivered and checked by you. We cannot be held responsible for any third-party charges incurred due to non-delivery of an order, or orders that have not been checked on delivery.

All orders will be delivered to a single address. For security reasons your first order using a credit/debit card for the first time when placed online or by phone will need to be delivered to the cardholder's address. Subsequent orders can then be made to an alternative address.

We will always endeavour to make one single delivery to you wherever possible to minimise any inconvenience. This means that when your order contains a mix of products with different delivery lead times, the longest lead time will apply to the whole order.

All deliveries must be received and signed for by a person over the age of 18. If no-one is available to take the delivery, we will leave details at the address to rearrange delivery. We may need to make an additional handling charge for redelivery. Should no-one be available to take the redelivery we may cancel the order and refund your money, excluding any delivery charges.

Due to insurance guidelines, delivery personnel are unable to enter private residences. The recipient of the products is responsible for any additional lifting once the delivery has been made.

For orders requiring palletised delivery the haulage company will attempt to deliver pallets as close as possible to your required position, usually to the closest hard-standing area. The haulage company is under no obligation to remove items from the pallet, nor carry items into your property. You should warn the Company if there is restricted access, soft or gravelled driveways.

Please ensure you provide your telephone number and e-mail address when you place your order.

Returns and Refunds:

You may return an item for any reason within 14 days from the date of delivery and we promise to give you a refund, excluding any original delivery costs incurred. We shall not be liable for the return cost of any non faulty product. Any faulty/damaged item may be returned for a refund within 30 days of delivery.

Certain products will be subject to a restocking fee, which will be deducted from any refund given. Please request further details regarding this prior to arranging the return of an item.

In the unlikely event that an item has been damaged during delivery, we will exchange the item or provide you with a full refund. Notification of any defect must be made within 5 days of the product being delivered to you, and return of the item must be with 14 days of delivery. We reserve the right to inspect all returned products prior to agreeing to any part-refund, full refund or product exchange.

Certain products offered on the website have specific, stated delivery times which supersede the standard delivery proposal (please see individual product details on the website).

Please note that made-to-measure items may not be returned unless they are faulty. This includes, but is not limited to, sectional radiators.

All refunds will be made within 30 days of notification to the account originally used to purchase the product.

Please contact us for more information

Be the first to review MN Cobble-Wax For Marble Surfaces. Write a review ›