Osmo UV-Protection-Oil Extra is a satin-matt, clear finish for exterior. It is based on natural oils, is microporous, and does not crack, flake, peel or blister. When used as a final finish after staining wood, Osmo UV-Protection-Oil Extra prolongs the renovation time significantly. As a stand alone finish, with two coats, it prolongs the greying process on vertical surfaces by UV-Protection factor 12 in comparison to untreated wood. The finish contains active ingredients which protect it from mould, algae and fungal attack. Easy to renew, no sanding or primer necessary. Easy to apply, will not dry during application.
Osmo UV-Protection-Oil Extra is based on natural vegetable oils. Natural oils penetrate deeply into the wood, keeping it elastic and healthy, and preventing it from drying and becoming brittle. The wood is allowed to breathe. Moisture can evaporate. Shrinking and swelling are reduced.
For all vertical exterior woods (dimensionally and non-dimensionally stable): doors, windows and window sills, carports, timber cladding, balcony, screens & fences, pergolas, garden houses and furniture.
Based on natural vegetable oils (sunflower- and soyabean oil), siccatives (drying agents) and additives. Disaromatized white spirit (benzene-free). This product fulfils EU-regulation (2004/42/EC) according to the VOC limit value of max. 400 g/l (Kat. A/e (2010)).
Wood surface must be clean, dry and frost-free (maximum moisture content 20%). Osmo UV-Protection-Oil is ready to use, please do no thin, stir well before use. Clean old open-porous finishes thoroughly. Remove old varnishes. Please do not sand even surfaces finer than P120. We recommend to apply a first coat with a pigmented oil such as One Coat Only, Natural Oil Wood Stain or Country Colour. If additional protection against blue stain, rot and mildew is required for outdoors pre-treat (if possible from all sides) with Osmo Base Coat WR
Apply thinly and evenly along the wood grain with either an Osmo Natural Bristle Brush or the Osmo Microfibre Roller, and spread well. Allow for good ventilation whilst drying. Apply a second coat as before. When applying on an already pigmented surface or when renovating 1 coat of the UV-Protection-Oil is enough. Make sure that the surface has been cleaned upfront. The finish is – among other things – influenced by the wood’s natural characteristics, therefore a trial application is required before finishing.
1 l = approx. 16 m² (1 coat smooth wood)
1 l = approx. 12 m² ( 2 coats smooth wood)
Stripped and rough sawn wood need more material because of their surface structure.
approx. 12 hours (normal climatic conditions, 23°C /50%, normal humidity). Lower temperatures and/or high humidity can increase the drying time.
Depending on the level of weathering apply 1 coat of Osmo UV-Protection-Oil Extra after approx. 3-4 years on the cleaned and intact finish. In general, one has to take a shorter renovation time into account when surfaces are exposed to extreme weathering, and surfaces where water cannot drain (horizontal surfaces) such as deckings, post caps, window sills and garden chairs (furniture). If, however, the greying process has already begun revive the surface with the Osmo Wood Reviver and re-apply 2 coats of the Osmo UV-Protection-Oil Extra.
Depending on the level of weathering apply 1 coat of Osmo UV-Protection-Oil Extra after approx. 3-4 years on the cleaned and intact finish. In general, one has to take a shorter renovation time into account when: 1. surfaces are exposed to extreme weathering, 2. using exotic wood species, 3. surfaces where water cannot drain (horizontal surfaces) such as deckings, post caps, garden chairs (furniture) and window sills. The UV-Protection-Oil Extra is unsuitable as a stand alone finish for deckings. There should be a minimum 15 degree angle on architectural joinery on the horizontal. Sharp edges have to be rounded (corner radius > 2 mm). If the greying process has already begun revive the surface with the Osmo Wood Reviver and reapply 2 coats of the Osmo UV-Protection-Oil Extra. In order to achieve UV factor 12, it is very important to apply the UV-Protection-Oil Extra twice. When only 1 coat has been applied on an untreated wood, the durability will be reduced significantly. Owing to the high oil content the clear UV-Protection-Oil shows a light yellowing effect when used as a final finish on white stained surfaces. Therefore, we recommend using the Natural Oil Woodstain 900 white as a final finish for already white stained surfaces. Oil enhances the natural tone of wood (wet look).
Damage caused during installation (fixing holes/cut edges) and other surface damages e.g. cracks should be treated immediately with two coats. These areas will grey quickly if left untreated.
There are two types of products that you can order from Period Property Store, which will affect delivery:
1. 'Standard' products are products that do not fall into our 'Big & Bulky' category.
2. 'Big & Bulky' products require palletised or specialist courier delivery.
Our 'Standard Parcel Delivery' & 'Next Day Parcel Delivery' options are not available for products marked 'Big & Bulky'
All orders are subject to product availability. We aim to process all orders within five working days.
Depending on your delivery postcode and which products you order, delivery charges may apply.
All delivery times and dates are estimates. We will try our best to meet the delivery estimates we have given you but shall not be responsible for any failure to deliver ordered products within these stated time frames. We will let you know if we cannot deliver your products within 30 days of when we receive payment from you, and give you the opportunity to either wait for the products or cancel your order. If you choose to cancel your order we will give you a full refund.
Our next day delivery service applies to working weekdays only and does not include weekends or bank holidays. This service is available up until 14:00 GMT on the day of placing an order. Orders received after 14:00 GMT with be dispatched on the following working weekday.
We are not able to process orders or deliver on UK bank holidays and Sundays.
We strongly recommend that you do not book fitters or tradesmen until your order has actually been delivered and checked by you. We cannot be held responsible for any third-party charges incurred due to non-delivery of an order, or orders that have not been checked on delivery.
All orders will be delivered to a single address. For security reasons your first order using a credit/debit card for the first time when placed online or by phone will need to be delivered to the cardholder's address. Subsequent orders can then be made to an alternative address.
We will always endeavour to make one single delivery to you wherever possible to minimise any inconvenience. This means that when your order contains a mix of products with different delivery lead times, the longest lead time will apply to the whole order.
All deliveries must be received and signed for by a person over the age of 18. If no-one is available to take the delivery, we will leave details at the address to rearrange delivery. We may need to make an additional handling charge for redelivery. Should no-one be available to take the redelivery we may cancel the order and refund your money, excluding any delivery charges.
Due to insurance guidelines, delivery personnel are unable to enter private residences. The recipient of the products is responsible for any additional lifting once the delivery has been made.
For orders requiring palletised delivery the haulage company will attempt to deliver pallets as close as possible to your required position, usually to the closest hard-standing area. The haulage company is under no obligation to remove items from the pallet, nor carry items into your property. You should warn the Company if there is restricted access, soft or gravelled driveways.
Please ensure you provide your telephone number and e-mail address when you place your order.
Returns and Refunds:
You may return an item for any reason within 14 days from the date of delivery and we promise to give you a refund, excluding any original delivery costs incurred. We shall not be liable for the return cost of any non faulty product. Any faulty/damaged item may be returned for a refund within 30 days of delivery.
Certain products will be subject to a restocking fee, which will be deducted from any refund given. Please request further details regarding this prior to arranging the return of an item.
In the unlikely event that an item has been damaged during delivery, we will exchange the item or provide you with a full refund. Notification of any defect must be made within 5 days of the product being delivered to you, and return of the item must be with 14 days of delivery. We reserve the right to inspect all returned products prior to agreeing to any part-refund, full refund or product exchange.
Certain products offered on the website have specific, stated delivery times which supersede the standard delivery proposal (please see individual product details on the website).
Please note that made-to-measure items may not be returned unless they are faulty. This includes, but is not limited to, sectional radiators.
All refunds will be made within 30 days of notification to the account originally used to purchase the product.
Please contact us for more information