Lithofin MN Slate Oil For Hearths & Floors

Code: LITH-MN-SLT-OIL
  • £25.18 inc vat
  • RRP £27.97 inc vat
Item out of Stock   |   Usually dispatched within 24 hours
Loading...
  • Easy to apply
  • High yield
  • Can be polished
  • Water-repellent
  • Contains solvents
  • For indoor use only

A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). The ready-to use protective and care treatment contains high quality waxes and resins in CFC-free solvents.

Properties:
Lithofin MN Slate Oil invigorates the stones colours thereby accentuating the natural structure of the material. Surfaces appear livelier and become water resistant. Lithofin MN Slate Oil develops an elegant sheen which can be increased through polishing. The colour intensification of the product conceals stains which may be in the surface. Thick layers are not formed because a large portion of the old coat is removed when the product is reapplied. Lithofin MN Slate Oil is therefore suitable for regular maintenance work.

Technical Data:
Density: approx. 0,80 g/cm³
Appearance: liquid, colourless, clear
Odour: aromatic
pH-Value: n.a.
Flash Point: >23°C
Solubility in Water: not soluble

Field of Use:
For initial treatment of newly installed surfaces such as floors, stairs, table tops, window sills, etc. Achieves a fresh look and protects the surface. Also suitable for touching up slate surfaces which have faded in colour. Highly suitable for regular care in order to maintain the colour-intensive appearance.
Surfaces: rough to finely honed clay slate surfaces, especially Indian, African and Italian slates.
For indoor use only.

Directions for Use:
Shake bottle before use. Newly installed surfaces: the surface to be treated must be completely dry. Evenly and  generously apply Lithofin MN Slate Oil with a sponge or cloth and allow it to dry.
Dirty and pre-treated surfaces: Apply generously and, after a few minutes, remove the dissolved residues with a cloth. Then apply again and allow to dry.
Please Note: always try the product in an inconspicuous area prior to use. The gloss level can be increased through polishing. If you are not satisfied with the result, apply again ensuring even distribution. In temperatures below 10°C, the
product may flake. In this case, store the bottle in a warm place and shake until the product has turned clear again.

Application Temperature:
The temperature of the surface should be between 5°C and 25°C. Switch off under floor heating.

Drying Time:
Approx 10 mins

Coverage:
approx. 20m² per litre depending on the surface.
Further Maintenance - Lithofin MN Slate Oil is suitable as a maintenance product due to its cleaning properties. In case of stubborn dirt deposits, use Lithofin MN Power-Clean.

* Please note that tile orders are subject to minimum order quantities to qualify for free delivery as they require specialist/palletised delivery.

Shipping:

There are two types of products that you can order from Period Property Store, which will affect delivery:

   1. 'Standard' products are products that do not fall into our 'Big & Bulky' category.
   2. 'Big & Bulky' products require palletised or specialist courier delivery.

Our 'Standard Parcel Delivery' & 'Next Day Parcel Delivery' options are not available for products marked 'Big & Bulky'

All orders are subject to product availability. We aim to process all orders within five working days.

Depending on your delivery postcode and which products you order, delivery charges may apply.

All delivery times and dates are estimates. We will try our best to meet the delivery estimates we have given you but shall not be responsible for any failure to deliver ordered products within these stated time frames. We will let you know if we cannot deliver your products within 30 days of when we receive payment from you, and give you the opportunity to either wait for the products or cancel your order.

Our next day delivery service applies to working weekdays only and does not include weekends or bank holidays. This service is available up until 14:00 GMT on the day of placing an order. Orders received after 14:00 GMT with be dispatched on the following working weekday.

We are not able to process orders or deliver on UK bank holidays and Sundays.

We strongly recommend that you do not book fitters or tradesmen until your order has actually been delivered and checked by you. We cannot be held responsible for any third-party charges incurred due to non-delivery of an order, or orders that have not been checked on delivery.

All orders will be delivered to a single address. For security reasons your first order using a credit/debit card for the first time when placed online or by phone will need to be delivered to the cardholder's address. Subsequent orders can then be made to an alternative address.

We will always endeavour to make one single delivery to you wherever possible to minimise any inconvenience. This means that when your order contains a mix of products with different delivery lead times, the longest lead time will apply to the whole order.

All deliveries must be received and signed for by a person over the age of 18. If no-one is available to take the delivery, we will leave details at the address to rearrange delivery. We may need to make an additional handling charge for redelivery. Should no-one be available to take the redelivery we may cancel the order and refund your money, excluding any delivery charges.

Due to insurance guidelines, delivery personnel are unable to enter private residences. The recipient of the products is responsible for any additional lifting once the delivery has been made.

For orders requiring palletised delivery the haulage company will attempt to deliver pallets as close as possible to your required position, usually to the closest hard-standing area. The haulage company is under no obligation to remove items from the pallet, nor carry items into your property. You should warn the Company if there is restricted access, soft or gravelled driveways.

Please ensure you provide your telephone number and e-mail address when you place your order.

Returns and Refunds:

You may return an item for any reason within 14 days from the date of delivery and we promise to give you a refund, excluding any original delivery costs incurred. We shall not be liable for the return cost of any non faulty product. Any faulty/damaged item may be returned for a refund within 30 days of delivery.

Certain products will be subject to a restocking fee, which will be deducted from any refund given. Please request further details regarding this prior to arranging the return of an item.

In the unlikely event that an item has been damaged during delivery, we will exchange the item or provide you with a full refund. Notification of any defect must be made within 5 days of the product being delivered to you, and return of the item must be with 14 days of delivery. We reserve the right to inspect all returned products prior to agreeing to any part-refund, full refund or product exchange.

Certain products offered on the website have specific, stated delivery times which supersede the standard delivery proposal (please see individual product details on the website).

Please note that made-to-measure items may not be returned unless they are faulty. This includes, but is not limited to, sectional radiators.

All refunds will be made within 30 days of notification to the account originally used to purchase the product.

Please contact us for more information

Be the first to review MN Slate Oil For Hearths & Floors. Write a review ›
Top